Yamaha TG500 - Manual (Page 43)

3. The Performance Mode
31
7
Shift the Bass Voice Up One Octave
Press the [PAGE] key, use the [-1/NO] and [+1/YES] keys to select the
“3-1-04:Note Shift” screen, then press [ENTER] (or simply press [
.] while
holding [PAGE]).
Since the bass voice we have selected will sound too low if played only on
the lower octaves of the controlling keyboard, we’ll shift its pitch up one
octave. Move the cursor to the layer-A “NtShft” (Note Shift) parameter and set
it to “+12”.
8
Set the Low Note Limits
Press the [PAGE] key, use the [-1/NO] and [+1/YES] keys to select the
“3-1-06:Note Limit-L” screen, then press [ENTER] (or simply press [
.] two
times while holding [PAGE]).
Set the layer-B and layer-C low note limits to “C3”.
PFM NtShft [A] BA Wood
0‹ 0‹ 0‹ ---
PFM NtLmt-L [A] BA Wood
C-2‹ C-2‹ C-2‹ ---
Layer “D”
voice.
Layer “D”
voice.
Layer “A”
voice.
Layer “B”
voice.
Layer “C”
voice.
Layer “C”
voice.
Layer “B”
voice.
Layer “A”
voice.