Yamaha TG500 - Manual (Page 244)

232
UTILITY MODE / WAVE EDIT MODE / 3: MIDI
3-4: PROGRAM CHANGE TABLE
3-4: PROGRAM CHANGE TABLE
These parameters determine which voice, performance combination, or multi setup
will be selected when a specific MIDI program change number is received.
UTL MIDI PC Tbl
000 VCE ¡00:AP Brite
PgmNo (Program change number)
Range: 00 … 127
Sets the MIDI program change number that will select the voice, perform-
ance combination, or multi setup specified by the “Source” and “VCE/PFM/
MLT” parameters described below.
Source
Range: PFM, VCE, MLT
Specifies a performance combination (PFM), voice (VCE), or multi setup
(MLT) to be selected when the MIDI program change number specified by the
“PgmNo” parameter, above, is received.
VCE/PFM/MLT (Voice, performance, or multi number)
Range: 00 … 63 (VCE/PFM), 0 … 15 (MLT)
Specifies the number of the performance, voice, or multi setup to be se-
lected when the program change number specified by the “PgmNo” parameters,
described above, is received.
VCE/PFM/MLT
Source
PgmNo
[UTILITY/SELECT] -> 3: MIDI -> [ENTER] -> [PAGE] -> 3-4: PC Table -> [ENTER]