Yamaha TG500 - Manual (Page 224)

212
MULIT EDIT MODE / 4: Effect
4-08: PARAMETER 1 / 4-09: PARAMETER 2
4-08: PARAMETER 1 / 4-09: PARAMETER 2
MLT EF1 Param
2. 0 +12 500 (kHz)Ãé
Each of the TG500’s 90 effects has 8 parameters that can be edited via the pa-
rameters in these three screens to fine-tune the effect.
MLT EF1 Param
è +1 2 1.4 0.9 ( dB)Ãé
Parameters
Parameters
MLT EF1 Param
è 8 6 36 ( % )
Parameters
Use the [
,] and [.] keys to select the parameters and switch between the three
parameter screens. The name of the selected parameter is shown in the upper right
corner of the display, while the parameter unit (“s” for seconds, “%” for percent,
“dB” for decibels, etc.) is shown in parentheses in the lower right corner.
The parameters are different for each effect (refer to page 271 through 281 for
details).
[PLAY/MODE] -> MLT PLAY -> [EDIT/COMPARE] -> [PAGE] -> 4: Effect -> [ENTER] -> [PAGE]
-> 4-08: Parameter 1 -> [ENTER]
-> 4-09: Parameter 2 -> [ENTER]