05: output, Drm output c 4 dry1: on dry2: on – Yamaha TG500 User Manual
Page 194
182
4-05: OUTPUT
DRUM VOICE EDIT MODE / 4: Effect
4-05: OUTPUT
These parameters turn the “dry lines” (i.e. the signal paths which bypasses each
effect processor) on or off, determining whether any dry signal output can occur at
OUTPUT 1 and OUTPUT 2. Individual settings can be made for each drum key.
DRM Output
C
4 Dry1: on Dry2: on
Key
(Key number)
Range: C1 … C5
Selects the the drum key to be edited. In addition to using the [-1/NO] and
[+1YES] keys, the drum key can be selected by simply pressing the appropriate
key on a keyboard connected to the TG500 MIDI IN terminal.
Dry1
Range: off, on
Turns the “dry line” bypassing the Output 1 on or off. When this parameter
is turned “off,” the “WET:DRY” parameters (page 184) have no effect.
Dry2
Range: off, on
Turns the “dry line” bypassing the Output 2 on or off.
Key
[PLAY/MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 4: Effect -> [ENTER] -> [PAGE]
-> 4-05: Output ->[ENTER]