2: initialize, Vce initialize, Vce initialize sure – Yamaha TG500 User Manual

Page 176

164

VOICE EDIT MODE / 4: Recall/Init.

4-2: INITIALIZE

When you want to program a totally new voice “from scratch,” rather than editing

an existing voice, use this function to initialize all voice parameters.

VCE Initialize

Press [ENTER] to begin the initialize procedure. The following confirmation

display will appear:

VCE Initialize Sure?

Press [+1/YES] to confirm that you want to go ahead with the initialize operation

(which will erase all current edited data), or press [-1/NO] to cancel.

“Completed!” will appear briefly on the display when the voice data has been

initialized.

For initial voice parameter, see page 284.

[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 4: Recall/Init. -> [ENTER] -> 4-2: Initialize -> [ENTER]