Error messages – Yamaha TG500 User Manual
Page 324
312
Appendix
ERROR MESSAGES
ERROR MESSAGES
● MIDI
COMMENTS
DISPLAY
Bulk
`
protected
`
!
Device
`
No.
`
is
`
off
`
!
Device
`
No.
`
mismatch
`
!
MIDI
`
buffer
`
full
`
!
MIDI
`
data
`
error
`
!
MIDI
`
checksum
`
err
`
!
When the TG500 attempted to receive or transmit a large
amount of MIDI data, its handling capacity was exceeded.
An error occurred when receiving MIDI data.
An error occurred when receiving bulk data.
Since the “Bulk Protect” parameter is on, the bulk data
was not received.
Since the device number is off, bulk data cannot be trans-
mitted or received.
Since the device numbers did not match, the bulk data
was not received.