Yamaha TG500 - Manual (Page 104)

92
4-2: INITIALIZE
PERFORMANCE EDIT MODE / 4: Recall/Init.
4-2: INITIALIZE
When you want to program a totally new performance combination “from
scratch,” rather than editing an existing combination, use this function to initial-
ize all performance parameters.
Press [ENTER] to begin the initialize procedure. The following confirmation
display will appear:
Press [+1/YES] to confirm that you want to go ahead with the initialize
operation (which will erase all current edited data), or press [-1/NO] to cancel.
“Completed!” will appear briefly on the display when the performance data
has been initialized.
For initial performance parameter, see page 283.
PFM Initialize
PFM Initialize Sure?
[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 4: Recall/Init. -> [ENTER] -> 4-2 : Initialize
-> [ENTER]