Yamaha TG500 - Manual (Page 112)

100
VOICE EDIT MODE / 1: Quick Edit
1-3: FILTER
1-3: FILTER
The simplified filter parameters provided here have been specifically created for
fast, efficient filter programming.
For full filter parameters see page 119.
VCE QED Filter
0 9:Sweep 127 71 +45
Type (Filter type)
Range: 0 … 15
Selects either the filter defined by the current filter parameter settings
(page 119), or one of 15 preset filter types for the current voice. The filter
types are:
Quick Edit Filter Types
00:-------- Full-edit filter.
01:VeloSoft Velocity sensitive, soft response.
02:VeloWide Velocity sensitive, wide response.
03:VeloHard Velocity sensitive, hard response.
04:VeloReso Velocity sensitive, resonant.
05:SynBass1 Synthesizer bass 1.
06:SynBass2 Synthesizer bass 2.
07:SynBras1 Synthesizer brass 1.
08:SynBras2 Synthesizer brass 2.
09:Sweep Sweep-frequency filter.
10:SlowAtak Slow-attack filter.
11:LPF_Init Initialized LPF.
12:HPF_Init Initialized HPF.
13:BPF_Init. Initialized BPF.
14:BEF_Init Initialized BEF.
15:Thru No filter.
Cof (Cutoff frequency)
Range: 0 … 127
Sets the cutoff frequency of the selected filter.
Lower cutoff values produce a lower cutoff frequency and higher values
produce a higher cutoff frequency. If the “Thru” filter type is selected, no
cutoff frequency can be set and “---” appears on the display in place of the
parameter.
Type Cof Res Vel
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 1: Quick Edit -> [ENTER] -> [PAGE]
-> 1-3 : Filter -> [ENTER]