Yamaha TG500 - Manual (Page 168)

156
3-7-07: PARAMETER 1 / 3-7-08: PARAMETER 2
VOICE EDIT MODE / 3: Full Edit. 3-7: Effect
3-7-07: PARAMETER 1 / 3-7-08: PARAMETER 2
Each of the TG500’s 90 effects has 8 parameters that can be edited via the param-
eters in these three screens to fine-tune the effect.
VCE EF1 Param
2. 5 1.0 5 ( s ) é
VCE EF1 Param
è 3 2 16 0 ( ms) é
VCE EF1 Param
è 4 5 12.0 ( % )
Use the [
,] and [.] keys to select the parameters and switch between the three
parameter screens. The name of the selected parameter is shown in the upper right
corner of the display, while the parameter unit (“s” for seconds, “%” for percent,
“dB” for decibels, etc.) is shown in parentheses in the lower right corner.
The parameters are different for each effect (refer to page 271 for details).
Parameters
Parameters
Parameters
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-7: Effect -> [ENTER]
-> [PAGE] -> 3-7-07: Parameter 1 -> [ENTER]
-> 3-7-08: Parameter 2 -> [ENTER]