Yamaha TG500 - Manual (Page 147)

135 PITCH EG DATA COPY
PITCH EG DATA COPY
VOICE EDIT MODE / 3: Full Edit. 3-4: PEG
This function facilitates voice editing by allowing the pitch EG parameters from
any other voice (the “source” voice) to be copied to the current voice. You can copy
a pitch EG setup that is close to the type you want, then edit it to produce the re-
quired sound.
Press the [STORE/COPY] key while in the PEG edit mode.
VCE PEG Copy from?
¡5 5:OR Rock
Use the [MEMORY] key to select the internal, preset, or card memory; then use
the [-1/NO] and [+1/YES] keys to select the voice from which the PEG data is to be
copied.
Once the source voice has been selected, press the [ENTER] key. “Sure?” will
appear on the display.
VCE PEG Copy Sure?
¡55:OR Rock
Press the [+1/YES] key to copy the PEG data, or press [-1/NO] to cancel the
copy operation. Once the copy operation has finished, “Completed!” will appear on
the display briefly, then the display will return to the PEG edit mode.
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-4: PEG -> [ENTER]