Yamaha TG500 - Manual (Page 101)

89
EFFECT DATA COPY
PERFORMANCE EDIT MODE / 3: Full Edit. 3-2: Effect
EFFECT DATA COPY
This function facilitates performance effect editing by allowing the effect
parameters from any other performance combination, voice, or multi setup to be
copied to the current performance combination. You can copy an effect setup
that is close to the type you want, then edit it to produce the required sound.
Move the cursor to the left parameter (press the [
,] key) and use the
[-1/NO] and [+1/YES] keys to select the mode containing the desired voice and
effect data (“PFM” = PERFORMANCE, “VCE” = VOICE, and “MLT” =
MULTI). Move the cursor to the right parameter (press the [
.] key) and, if a
voice or performance combination is selected as the source, use the
[MEMORY] key to select the memory area from which the source voice or
performance combination is to be selected. Use the [-1/NO] and [+1/YES] keys
to select the source voice or performance number. The [-1/NO] and [+1/YES]
keys can be used to select the source multi number (0 … 15) when “MLT” is
selected.
Once the source performance combination, voice, or multi setup has been
selected, press the [ENTER] key. “Sure?” will appear on the display.
Press the [+1/YES] key to copy the effect data, or press [-1/NO] to cancel
the copy operation. Once the copy operation has finished, “Completed!” will
appear on the display briefly, then the display will return to the effect edit
mode.
PFM EF Copy from?
PF M ´00:CO Aster
PFM EF Copy Sure?
PFM ´00:CO Aster
[PLAY MODE] -> PFM PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-2:Effect -> [ENTER]
-> [STORE/COPY]