Yamaha TG500 - Manual (Page 132)

120
VOICE EDIT MODE / 3: Full Edit. 3-3: Filter
3-3-01: PARAMETER
Cutoff
frequency.
FREQUENCY
LEVEL
PASSBAND
(Signals in this
frequency range
pass through)
Signals above the
cutoff frequency
are blocked
Cutoff
frequency.
FREQUENCY
LEVEL
PASSBAND
(Signals in this
frequency range
pass through)
Signals below the
cutoff frequency
are blocked
● “HPF” Type
The “HPF” (High Pass Filter) setting produces a filter response that allows
only frequencies above the cutoff frequency (See “Cutoff” below) to pass.
● “BPF” Type
The “BPF” (Band Pass Filter) setting produces a filter response that allows
only a band of frequencies centered at the cutoff frequency (See “Cutoff”
below) to pass. The “Band” parameter (below) determines the width of the pass
band.