Yamaha TG500 - Manual (Page 248)

236
UTILITY MODE / WAVE EDIT MODE / 4: Card
4-4: FORMAT
4-4: FORMAT
New memory cards, or cards that have been formatted for use with a different
instrument or device, will have to be formatted specifically for use with the TG500.
Note that this operation will erase any existing data on the card.
UTL Card Format
Slot= 1(------)
Position the cursor at the “Slot=” parameter and select “1” if you want to format
a card plugged into the DATA 1 slot, or “2” to format the DATA 2 slot. After plug-
ging the card to be formatted into the appropriate card slot, press [ENTER] to begin
the card format procedure. The following confirmation display will appear:
UTL Card Format Sure?
Slot= 1(------)
Press [+1/YES] to confirm that you want to go ahead with the card format opera-
tion, or press [-1/NO] to cancel.
When the card has been formatted, “Completed!” will appear briefly on the dis-
play.
[UTILITY/SELECT] -> 4: Card -> [ENTER] -> [PAGE] -> 4-4: Format -> [ENTER]