2: enable – Yamaha TG500 User Manual

Page 252

Text mode
Original mode

240

UTILITY MODE / WAVE EDIT MODE / 1: Waveform

1-2: ENABLE

Turns waveform assignment on or off.

UTL Waveform Enable

(InitWave) of

Enable

Range: off, on

Set to “on” to turn wave assignment on. If wave assignment is turned “off”,

“---” appears in place of the “From” and “To” parameters in the preceding
screen. This parameter can only be turned “on” if an assignable sample is
available.

Enable

[UTILITY/SELECT] -> 5: Wave -> [ENTER] -> [EDIT/COMPARE] -> 1: Waveform -> [ENTER] -> [PAGE]
-> 1-2: Enable -> [ENTER]