Yamaha TG500 - Manual (Page 159)

147
VOICE EDIT MODE / 3: Full Edit. 3-6: Controller
3-6-05: MIDI CONTROLLER 3 / 3-6-06: MIDI CONTROLLER
4
3-6-05: MIDI CONTROLLER 3 / 3-6-06: MIDI CONTROLLER 4
VCE CTRL MC3
4 1:LFO_Phase 0% 49%
set the maximum and minimum limits of the control range.
Param (MC3 or MC4 parameter)
Range: 0 … 75
Assigns any of 75 different voice parameters to be controlled via MIDI
controller 3 or 4.
The numbers and abbreviations associated with each voice parameter are
listed below:
Param
Min Max
20: “EF_SendLvl”
21: “OS_FrqFine”
22: “OS_Random ”
23: “PEG_Rate1 ”
24: “PEG_Rate2 ”
25: “PEG_Rate3 ”
26: “PEG_RlsRe ”
27: “PEG_Level0”
28: “PEG_Level1”
29: “PEG_Level2”
30: “PEG_Level3”
31: “PEG_RlsLvl”
32: “PEG_Range ”
33: “PEG_LvlVel”
34: “PEG_RtVel ”
35: “LFO_Speed ”
36: “LFO_Delay ”
37: “LFO_Pmod ”
38: “LFO_Amod ”
39: “LFO_Fmod ” 0: “No_Assign ”
1: “CT_MW_Pmod”
2: “CT_MW_Amod”
3: “CT_MW_Fmod”
4: “CT_MW_Coff”
5: “CT_MW_EGBs”
6: “CT_FC_Pmod”
7: “CT_FC_Amod”
8: “CT_FC_Fmod”
9: “CT_FC_Coff”
10: “CT_FC_EGBs”
11: “CT_AT_Pmod”
12: “CT_AT_Amod”
13: “CT_AT_Fmod”
14: “CT_AT_Coff”
15: “CT_AT_EGBs”
16: “CT_AT_PtBs”
17: “CT_PBRange”
18: “CT_VLLoLim”
19: “TotalLevel”
“MC3” (MIDI Controller 3) and “MC4” (MIDI Controller 4) can be assigned to
control a wide range of voice parameters in real time while playing the TG500. MIDI
controller assignments are made via the “UTILITY” mode “2:Controller” screen —
page 223. These parameters assign a voice parameter to MIDI controller 3 or 4, and
MC3 or MC4 PARAMETER LIST (0 … 39)
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-6: Controller -> [ENTER]
-> [PAGE] -> 3-6-05: MIDI Ctrl 3 -> [ENTER]
-> 3-6-06: MIDI Ctrl 4 -> [ENTER]