Yamaha TG500 - Manual (Page 111)

99
VOICE EDIT MODE / 1: Quick Edit
1-2: AMPLITUDE EG
14:SynPad Synthesizer pad.
15:SynComp Synthesizer comping (backing).
16:Percusiv Percussive.
17:S.Ideal1 Sound ideal envelope 1.
18:S.Ideal2 Sound ideal envelope 2.
19:S.Ideal3 Sound ideal envelope 3.
20:S.Ideal4 Sound ideal envelope 4.
21:Init Initialized envelope.
AtkRate (Attack rate)
Range: 0 … 63
Sets the attack rate for the selected envelope. “63” produces the fastest
attack, while “0” produces the slowest attack.
SusLvl (Sustain level)
Range: 0 … 63
Sets the sustain level for the selected envelope.
RlsRate (Release rate)
Range: 0 … 63
Sets the release rate for the selected envelope.
Vel (Velocity sensitivity)
Range: -7 … +7
Determines how the output level of the current voice changes in response to
velocity changes (e.g. keyboard dynamics).
Plus “+” settings produce higher output level in response to higher velocity
values — i.e. the harder a key is played, the louder the sound. The maximum
setting of “+7” produces the maximum level variation in response to velocity
changes. Minus “–” settings produce the opposite effect: lower level in response
to higher velocity. A setting of “+0” results in no level variation.