Yamaha TG500 - Manual (Page 161)

149
CONTROLLER DATA COPY
VOICE EDIT MODE / 3: Full Edit. 3-6: Controller
This function allows the controller parameters from any other voice (the “source”
voice) to be copied to the current voice. You can copy a controller setup that is close
to the type you want, then edit it to produce the required sound.
Press the [STORE/COPY] key while in the controller edit mode.
VCE CTRL Copy from?
¡4 3:ME Hit
CONTROLLER DATA COPY
Use the [MEMORY] key to select the internal, preset, or card memory; then use
the [-1/NO] and [+1/YES] keys to select the voice from the which the controller data
is to be copied.
Once the source voice has been selected, press the [ENTER] key. “Sure?” will
appear on the display.
VCE CTRL Copy Sure?
¡43:ME Hit
Press the [+1/YES] key to copy the controller data, or press [-1/NO] to cancel the
copy operation. Once the copy operation has finished, “Completed!” will appear on
the display briefly, then the display will return to the controller edit mode.
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-6: Controller -> [ENTER]