Yamaha TG500 - Manual (Page 165)

153
VOICE EDIT MODE / 3: Full Edit. 3-7: Effect
3-7-04: OUTPUT LEVEL
3-7-04: OUTPUT LEVEL
Depending on the selected effects the TG500 effect system can have up to four
separate output levels that are adjusted by the parameters provided in this screen.
VCE EF Output Level <1a>
10 0% ---% ---% 100%
1a, 1b, 2a, and 2b (Effect output levels)
Range: 0 … 100
A setting of “0” turns output from the corresponding effect stage off, while
a setting of “100” produces maximum output level.
If the selected effect is a “single” type, then only the “1a” or “2a” output
level is available. If it is a “cascade” type, then only the “1b” or “2b” output
level is available. Both the “1a” and “1b” or “2a” and “2b” levels are available
only if the selected effect is a “dual” type. See page 251 for details on the
effect stages and the TG500 effect system in general.
1a 1b 2a 2b
[PLAY MODE] -> VCE PLAY -> [EDIT/COMPARE] -> 3: Full Edit -> [ENTER] -> 3-7: Effect -> [ENTER]
-> [PAGE] -> 3-7-04: Output Level -> [ENTER]