Toshiba M10 - Manual (Page 231)

4.4 Slim Select Bay Module 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-19
4.4 Slim Select Bay Module
Removing the Slim Select Bay Module
To remove the slim select bay module, follow the steps below and refer to Figures 4-9 and 4-
10.
1. If a screw (M3 ×4 black flat-head screw) is set in the lock position, remove it.
2. Slide the latch toward the back of the computer to release it, and then pull the
module out of the slim select bay.
Lock position
Unlock position
M3
×
4 black flat-head screws
Latch
Slim select bay module
Figure 4-9 Removing the slim select bay module