General, 1 general, 1 general 4 replacement procedures – Toshiba M10 User Manual
Page 213
4.1 General
4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431)
4-1
4 p
4.1 General
This section explains how to disassemble the computer and replace Field Replaceable Units
(FRUs). It may not be necessary to remove all the FRUs in order to replace one. The chart
below is a guide to which FRUs need to be removed in order to remove others. Always start
by removing the battery pack, next, optional items such as the optional PC card, optional
mini PCI card and optional memory module, then follow the line on the chart to determine
which FRU you must remove next in order to repair the one you think is causing the
computer to operate improperly. Refer to the example at the bottom of the page.
Internal Mic.
LCD Module
Top Cover with Display Assembly
4.15
4.2
Memory
Modules
4.4
Slim
Select
Bay
Module
4.5
MDC
4.6
CPU
4.3
HDD
4.7
Keyboard
4.9
Speakers
4.10
Palm Rest
4.12
Internal
Mic.
4.14
Wireless
Lan
4.11
Touch
Pad
4.16
Sound Board
4.17
Cooling Fan
4.18
RTC Battery
System Board
4.19
4.20
VGA Board
4.21
USB Board
4.22
Display Mask
4.23
FL Inverter Board
4.24
LCD Module
4.2 to 4.15
4.27 to 34
4.25
Antenna
4.26
LCD/FL
Cable
4.13
Bluetooth
FL
4.8
Switch
Board
Top Cover with Display Assembly
4.15
4.2
Memory
Modules
4.4
Slim
Select
Bay
Module
4.5
MDC
4.6
CPU
4.3
HDD
4.7
Keyboard
4.9
Speakers
4.10
Palm Rest
4.12
Internal
Mic.
4.14
Wireless
Lan
4.11
Touch
Pad
4.16
Sound Board
4.17
Cooling Fan
4.18
RTC Battery
System Board
4.19
4.20
VGA Board
4.21
USB Board
4.22
Display Mask
4.23
FL Inverter Board
4.24
LCD Module
4.2 to 4.15
4.27 to 34
4.25
Antenna
4.26
LCD/FL
Cable
4.13
Bluetooth
FL
4.8
Switch
Board
How to See the Chart
Two examples of referring to
the chart are shown below.
•Removing the Internal
Microphone
You have to remove the HDD,
keyboard, and palm rest before
removing the internal
microphone.
•Removing the LCD Module
You have to remove the display
mask and FL inverter board
before removing the LCD
module.