Toshiba M10 - Manual (Page 188)

3 Tests and Diagnostics 3.28 SETUP
3-82 Satellite Pro M10 Series Maintenance Manual (960-431)
Moving Within the SETUP Menu and Changing Values
1. Press Å and Æ to move between the two columns. Press PgDn and PgUp to move
between the two pages. Press ↑ and ↓ to move between items in a column.
2. Press either the space bar to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
The following message is displayed:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
2. To make other changes, press N. Repeat the steps above.
3. To accept the changes, press Y.
NOTE: You can press Esc to quit at any time without saving changes. SETUP asks you
to confirm that you do not want to save your changes toward User.
The Factory Preset Configuration
When you access SETUP, the current configuration is displayed.
1. To show the factory preset configuration, press Home.
2. Press End and then press Y to accept the factory preset settings.
NOTE: When you execute the default setting, the following settings are not changed:
HDD Mode
Password
Write Policy in the CPU Cache