Toshiba M10 - Manual (Page 117)

3.4 System Test 3 Tests and Diagnostics
Satellite Pro M10 Series Maintenance Manual (960-431) 3-11
Subtest 07 DMI read
Reads the factory setting for the serial and DMI numbers.
Model Name : XXXXXX
Version Number : XXXXXX-XXXXX
Serial Number : XXXXXXXXXX
Model Number : XXXXXX-XXXXX
PCN/BND Number : XXXXXXXXXXXXXXXXXXXX
UUID Number : XXXXXXXXXXXXXXXXXXXXXXXXX
To exit this subtest and return to the SYSTEM TEST menu, press Enter.
Subtest 08 DMI write
The following messages appear in order. When this subtest is executed. Input
each information. (If you do not replace the PCB, the DMI information should
not be changed.)
1. “ Enter Model Name ? ” is displayed.
Input the computer’s model name and press Enter. (e.g. DynaBook
Satellite)
2. “ Enter Version Number ? ”
Input the computer’s version number and press Enter. (e.g. PS245U-AAA13)
3. “ Enter Serial Number ? ”
Input the computer’s serial number and press Enter. (e.g. Z2020855JU)
4. “ Enter Model Number ? ”
Input the computer’s sales model number and press Enter. (e.g. PS245U-
AAA13)
5. “ Enter Bundle Number ? ”
Input the computer’s PCN/Bundle number and press Enter. (e.g.
PCN1190CCZ01/S3A1320D990)
6. “ Write data OK (Y/N) ? ”
When Y is press, the DMI information is written to the Flash-ROM.