Toshiba M10 User Manual

Page 199

3.28 SETUP

3 Tests and Diagnostics

Satellite Pro M10 Series Maintenance Manual (960-431)

3-93

The options in this tab are ECP and Standard Bi-directional.

ECP

Sets the port mode to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)

Std. Bi-Direct.

This setting should be used with some other parallel devices.

(d) Hard Disk Mode

Use this item to select the hard disk mode.

Enhanced IDE

Select this mode when using an operating system that

(Normal)

supports Enhanced IDE. (Default)

Standard IDE

Select this mode when using an operating system that
does not support Enhanced IDE.

NOTE: Formats for Enhanced IDE and Standard IDE are different, so if
you change the setting, you will have to reformat the hard disk for the
appropriate setting.

15. Legacy Emulation

(a) USB keyboard/Mouse Legacy Emulation.

Use this option to enable or disable USB KB/Mouse Legacy Emulation. If
your operating system does not support USB, you can still use a USB mouse
and keyboard by setting the USB KB/Mouse Legacy Emulation item to
Enabled.

Enabled

USB Legacy Support can be used. (Default)

Disabled

USB Legacy Support cannot be used.

(b) USB-FDD Legacy Emulation.

Use this option to enable or disable USB-FDD Legacy Emulation.

Enabled

USB Legacy Support can be used. (Default)

Disabled

USB Legacy Support cannot be used.