Toshiba M10 - Manual (Page 120)

3 Tests and Diagnostics 3.5 Memory Test
3-14 Satellite Pro M10 Series Maintenance Manual (960-431)
Subtest 04 Cache Memory
To test the cache memory, a pass-through write-read comparison of ‘5A’ data
is run repeatedly to the test area (‘7000’:‘Program’ size to ‘7000’:‘7FFF’ (32
KB)) to check the hit-miss ratio (on/off status) for CPU cache memory. One
test takes 3 seconds.
Number of misses < Number of hits → OK
Number of misses ≥ Number of hits → Fail
Subtest 05 L2 Cache Memory
To test the L2 cache memory, a test similar to that for the cache memory is
performed.
Subtest 06 Stress
The conventional memory is provided with a write/read buffer (size 1b30 h)
and creates write data in the write buffer. Subsequent to 1 MB, the data is
written in the write buffer and is read into the read buffer, followed by a data
comparison up to the maximum memory size.