Raritan Engineering Command Center CC-SG - Manual (Page 73)

C HAPTER 5: ADDING DEVICES AND DEVICE G ROUPS 57
Copy Device Configuration
This command allows you to copy configurations from one device to another or multiple devices.
Note: Configuration can only be copied between Dominion SX units and DSX units that have the
same number of ports.
1. Click on the Devices tab and select the device whose configuration you wish to copy to other
devices from the Devices tree.
2. On the Devices menu, click Device Manager, and then click Copy Device Configuration.
The Copy Device Configuration screen appears.
Figure 63 Copy Device Configuration Screen
3. If you have used the Backup Device option on this device, you can copy that configuration
instead by selecting From Saved Configuration and then selecting the configuration from
the saved configuration drop-down arrow.
4. Highlight the devices you want to copy this configuration to in the Available Devices column
and click the right arrow to move them to the Copy Configuration To column. The left
arrow moves selected devices out of the Copy Configuration To column.
5. Click OK to copy the configuration to the devices in the Copy Configuration To column, or
Cancel to exit without copying. A Restart message appears after copying.
6. Click Yes to restart the device or No to close the window without restarting. A Device
Configuration Copied Successfully to message confirms that device configuration has been
copied.
7. Repeat steps 1 through 6 to copy other devices’ configurations.
Upgrade Device
Use the Upgrade Device command to download new versions of device firmware.
1. Click on the Devices tab and select a device from the Devices tree.
2. On the Devices menu, click Device Manager, and then click Upgrade Device. The Upgrade
Device screen appears.
Figure 64 Upgrade Device Screen
3. Click on the Firmware Name drop-down arrow and select the appropriate firmware from the
list (Raritan or your reseller will provide this information).
4. Click OK to upgrade the device or Cancel to close the Upgrade Device screen.