Nortel Networks WEB OS 212777 - Manual (Page 94)

Web OS 10.0 Application Guide
94 n Chapter 4: OSPF
212777-A, February 2002
5. Configure the backup virtual server.
Alteon Web switch # 1 will act as a backup for virtual server 10.10.10.2. Both virtual servers in
this example are configured with the same real server group and provide identical services.
6. Configure IP interfaces for each network that will be attached to OSPF areas.
7. Enable OSPF on Web switch 1.
8. Define the backbone.
9. Define the stub area.
>> Virtual server 2 http service # /cfg/slb/virt 2 (Select menu for virtual server 2)
>> Virtual server 1 # vip 10.10.10.2 (Set the IP address for virtual server 2)
>> Virtual server 1 # ena (Enable the virtual server)
>> Virtual server 1 # service http (Select menu for service on virtual server)
>> Virtual server 1 # group 1 (Use real server group 1 for http service)
>> Virtual server 1 # /cfg/ip/if 1 (Select menu for IP interface 1)
>> IP Interface 1 # addr 10.10.7.1 (Set IP address on backbone network)
>> IP Interface 1 # enable (Enable IP interface 1)
>> IP Interface 1 # ../if 2 (Select menu for IP interface 2)
>> IP Interface 2 # addr 10.10.10.40 (Set IP address on stub area network)
>> IP Interface 2 # enable (Enable IP interface 2)
>> IP Interface 2 # ../ospf/on (Enable OSPF on Web switch 1)
>> Open Shortest Path First # aindex 0 (Select menu for area index 0)
>> OSPF Area (index) 0 # areaid 0.0.0.0 (Set the ID for backbone area 0)
>> OSPF Area (index) 0 # type transit (Define backbone as transit type)
>> OSPF Area (index) 0 # enable (Enable the area)
>> OSPF Area (index) 0 # ../aindex 1 (Select menu for area index 1)
>> OSPF Area (index) 1 # areaid 0.0.0.1 (Set the ID for stub area 1)
>> OSPF Area (index) 1 # type stub (Define area as stub type)
>> OSPF Area (index) 1 # enable (Enable the area)