Nortel Networks WEB OS 212777 - Manual (Page 458)

Web OS 10.0 Application Guide
458 n Chapter 17: Bandwidth Management
212777-A, February 2002
3. On the switch, select a BWM contract and name the contract.
Each contract must have a unique number from 1 to 256.
4. Set the bandwidth policy for this contract.
Each BWM contract must be assigned a bandwidth policy.
5. Enable this BWM contract.
6. Select the second bandwidth policy.
7. Set the hard, soft, and reserved rate limits for this policy, in Mbps.
8. On the switch, select the second BWM contract and name the contract.
9. Set the bandwidth policy for this contract.
Each BWM contract must be assigned a bandwidth policy.
10. Enable this BWM contract.
>> Policy 1# /cfg/bwm/cont 1 (Select BWM contract 1)
>> BWM Contract 1# name dial-up (Assign contract name “dial-up”)
>> BWM Contract 1# pol 1 (Assign policy 1 to BWM Contract 1)
>> BWM Contract 1# ena (Enables this BWM contract)
>> BWM Contract 1# /cfg/bwm/pol 2 (Select bandwidth policy 2)
>> Policy 2# hard 30 (Set “never exceed” rate)
>> Policy 2# soft 25 (Set desired bandwidth rate)
>> Policy 2# resv 20 (Set committed information rate)
>> Policy 2# /cfg/bwm/cont 2 (Select BWM contract 2)
>> BWM Contract 2# name broadband (Assign contract name “broadband”)
>> BWM Contract 2# pol 2 (Assign policy 2 to BWM contract 2)
>> BWM Contract 2# ena (Enables this BWM contract)