Nortel Networks WEB OS 212777 - Manual (Page 61)

Web OS 10.0 Application Guide
Chapter 2: VLANs n 61
212777-A, February 2002
3. Configure the default gateways.
Configuring default gateways 5 and 6 for VLANs 2 and 3 respectively. Configure default gate-
way 1 for load balancing session requests and as backup when default gateways 5 and 6 fail.
N OTE – The IP address for default gateways 1 to 4 must be unique. IP addresses for default
gateways 5 to 250 can be set to the same IP address as the other gateways (including default
gateway 1 to 4). For example, you can configure two default gateways with the same IP
address for two different VLANs.
4. Add the VLANs to the default gateways and enable them.
5. Apply and verify your configuration.
Examine the results under the gateway section. If any settings are incorrect, make the appropri-
ate changes.
>> /cfg/ip/gw 5 (Select default gateway 5)
>> Default gateway 5# addr 10.10.1.20 (Assign IP address for gateway 5)
>> Default gateway 5# ../gw 6 (Select default gateway 6)
>> Default gateway 6# addr 10.10.1.30 (Assign IP address for gateway 6)
>> Default gateway 6# ../gw 1 (Select default gateway 1)
>> Default gateway 1# addr 10.10.4.1 (Assign IP address for gateway 1)
>> /cfg/ip/gw 5 (Select default gateway 5)
>> Default gateway 5# vlan 2 (Add VLAN 2 for default gateway 5)
>> Default gateway 5# ena (Enable default gateway 5)
>> Default gateway 5# ../ gw 6 (Select default gateway 6)
>> Default gateway 6# vlan 3 (Add VLAN 3 for default gateway 6)
>> Default gateway 6# ena (Enable default gateway 6)
>> Default gateway 6# ../gw 1 (Select default gateway 1)
>> Default gateway 1# ena (Enable gateway 1 for all VLAN s)
>> Default gateway 1# ../cur (View current IP settings)