Nortel Networks WEB OS 212777 - Manual (Page 274)

Web OS 10.0 Application Guide
274 n Chapter 11: High Availability
212777-A, February 2002
3. Scroll to the bottom of the text file and delete anything past “Script End.”
4. Save the changes to the text file as “Customer Name” Switch 2.
Move your serial cable to the console port on the second switch. Any configuration on it needs
to be deleted by resetting it to factory settings, using the following command:
You can tell if the switch is at factory default when you log on because the switch will prompt
you if you want to use the step-by-step configuration process. When it does, respond: “No.”
5. In HyperTerminal, go to transfer/send text file and send the Switch 2 text file. The configu-
ration will dump into the switch. Simply type apply, then save. When you can type charac-
ters in the terminal session again, reboot the switch (
/boot/reset) .
>> Main# /boot/conf factory/reset