Nortel Networks WEB OS 212777 - Manual (Page 210)

Web OS 10.0 Application Guide
210 n Chapter 8: Application Redirection
212777-A, February 2002
13. Save your new configuration changes.
14. Check the SLB information.
Check that all SLB parameters are working according to expectation. If necessary, make any
appropriate configuration changes and then check the information again.
N OTE – Changes to filters on a given port only effect new sessions. To make filter changes
take effect immediately, clear the session binding table for the port (see the /oper/slb/
clear command in the Web OS Command Reference).
Delayed Binding for Web Cache Redirection
To configure delayed binding on your Web switch for WCR only, use the following command:
For more conceptual information on delayed binding, see “Delayed Binding” on page 146 .
>> Layer 4# save (Save for restore after reboot)
>> Layer 4# /info/slb (View SLB information)
>> # /cfg/slb/filt /adv/urlp ena