Table 2-3, Route cache example 59 – Nortel Networks WEB OS 212777 User Manual
Page 59
Web OS 10.0 Application Guide
Chapter 2: VLANs
n
59
212777-A, February 2002
In the example shown in
, if default gateways 5 or 6 fail, then traffic is directed to
default gateway 1, which is configured with IP address 10.10.4.1. If default gateways 1
through 4 are not configured on the switch, then packets from VLAN 2 and VLAN 3 are dis-
carded.
The route cache table on the switch records each session request by mapping the destination IP
address with the MAC address of the default gateway. The command
/info/arp/dump
on
the switch command line will display the entries in the route cache similar to those shown in
. The destination IP addresses (see the last two rows) are associated with the MAC
addresses of the default gateways.
As shown in
, traffic from VLAN 2 uses Gateway 5 to access destination IP address
192.168.20.200. If traffic from VLAN 3 requests the same destination address, then traffic is
routed via Gateway 5 instead of Gateway 6, because 192.168.20.200 in the route cache is
mapped to Gateway 5. If the requested route is not in the route cache, then the switch reads the
routing table. If the requested route is not in the routing table, then the switch looks at the con-
figured default Gateway.
Table 2-3 Route Cache Example
Destination IP
address
Flags
MAC address
VLAN
Port
Referenced
ports
10.10.1.1 P
00:60:cf:46:48:60
4
1-9
10.10.1.20
00:60:cf:44:cd:a0
4
1
empty
10.10.1.30
00:60:cf:42:3b:40
4
2
empty
10.10.4.1
00:60:cf:42:77:e0
1
3
empty
10.10.4.40
P
00:60:cf:46:48:60
1
1-9
172.21.2.27
00:50:da:17:c8:05
2
7
1
172.21.2.200
P
00:60:cf:46:48:60
2
1-9
172.21.3.14
00:c0:4f:09:3e:56
3
8
2
172.21.2.200
P
00:60:cf:46:48:60
3
1-9
192.168.20.200
R
00:60:cf:44:cd:a0
4
1
7
200.1.2.200
R
00:60:cf:42:3b:40
4
2
8