Nortel Networks WEB OS 212777 - Manual (Page 167)

Web OS 10.0 Application Guide
Chapter 6: Server Load Balancing n 167
212777-A, February 2002
To configure the switch for WAN link load balancing:
1. Define a real server with proxy disabled.
2. Add the real server to a real server group using the response metric.
3. Define the WAN link load balancing redirection filter.
4. Enable WAN link load balancing for the redirection filter.
5. Enable WAN link load balancing proxy for the redirection filter.
6. Apply and save your changes.
>> # /cfg/slb/real 1 (Select the real server menu)
>> Real server 1# ena (Enable real server 1)
>> Real server 1# rip < IP address > (Set the real server IP address)
>> Real server 1# proxy dis (Disable proxy)
>> # /cfg/slb/group 1
>> Real server group 1# add 1
>> Real server group 1# metric response
>> Real server group 1# /cfg/slb/filt 1
>> Filter 1# ena
>> Filter 1# action redir
>> Filter 1# group 1
>> # /cfg/slb/filt 1/adv/linklb ena
>> # /cfg/slb/filt 1/adv/proxy ena
>> Filter 1 Advanced# apply
>> Filter 1 Advanced# save