Nortel Networks WEB OS 212777 - Manual (Page 356)

Web OS 10.0 Application Guide
356 n Chapter 14: Virtual Private Network Load Balancing
212777-A, February 2002
VPN Load-Balancing Configuration
Requirements
n
Configure the switch with firewall load balancing. For more information, see “Firewall
Load Balancing” on page 313 .
n
Enable the Return to Sender (RTS) feature on the ports attached to the VPN devices, using
the following command:
VPN Load-Balancing Configuration Example
The following example uses Alteon Web switches for VPN load balancing. The configuration
is for four Web switches, four subnets, and two VPN devices.
Figure 14-2 VPN Load-Balancing Configuration Example
Build the topology illustrated in Figure 14-2 on page 356 , and configure the switches as shown
on the following pages.
>> # /cfg/slb/port /rts ena