Nortel Networks WEB OS 212777 - Manual (Page 379)

Web OS 10.0 Application Guide
Chapter 15: Content Intelligent Switching n 379
212777-A, February 2002
7. Enable SLB on the switch.
8. Enable DAM on the switch or configure a proxy IP address on the client port.
n
To turn on DAM:
n
To turn off DAM and configure a proxy IP address on the client port:
N OTE – By enabling DAM on the switch or, alternatively, disabling DAM and configuring a
Proxy IP address on the client port, port mapping for URL load balancing can be performed.
9. Enable URL-based SLB on the virtual server(s).
Statistics for URL-Based Server Load Balancing
To show the number of hits to the SLB or cache server, use this command:
Sample Statistics:
>> # /cfg/slb/on (Turn SLB on)
>> # /cfg/slb/adv/direct ena
>> # /cfg/slb/direct dis
>> # port 2/pip 12.12.12.12
>> # proxy ena
>> # /cfg/slb/virt < virtual server number >/service 80/httpslb urlslb
>> # /stats/slb/layer7/lb
ID SLB String Hits
1 any 73881
2 .gif 0
3 /sales 0
4 /xitami 162102
5 /manual 0
6 .jpg 0