Pitney Bowes DM550 - Manual (Page 93)

SV61436 Rev. B 5-25
DM500™ and DM550™Digital Mailing System Operating Guide
Taking the
Meter Out of
Service
12
Call your Pitney Bowes representative if you need to return the postage
meter (contained in the IntelliLink® Control Center) to Pitney Bowes.
When instructed, follow the procedure here.
1. Press the
Menu key and select Set Up.
2. Select Take Meter Out of Service.
3. Select Transfer Funds from Meter.
This transfers the funds from your meter back to your account.
4. The system transfers the funds and displays the amount transferred.
5. To print this amount on an envelope, place an envelope on the feed
deck and press the Start key. To print on a tape, simply press the Tape
key.
13
Adding an
Optional
Printer
You can connect a Pitney Bowes external laser printer to your mailing
system. To add this optional external printer, all you need to do is plug the
USB connector from the printer into one of the two upper-most USB con-
nectors on the back of the mailing system base. Your mailing system rec-
ognizes the printer shortly after you plug it into the base.
The dual USB ports are located on the right back corner of the system
base as shown here.
Dual External Device
USB Ports