Pitney Bowes DM550 - Manual (Page 87)

SV61436 Rev. B 5-19
DM500™ and DM550™Digital Mailing System Operating Guide
Timeouts:
Feeding
Timeout
Use this option to specify how much time to allow before the feeder stops
after the last envelope is processed.
You can set this timeout for 5 - 90 seconds, in 1 second increments. The
default timeout is 5 seconds.
This reduces the wear on your machine and acts as a safety measure if
you leave the machine unattended.
1. Press the
Menu key and select Set Up.
2. Select Basic Settings and then Timeouts.
3. Select Feeding Timeout.
4. Enter the number of seconds (0 - 90) using the numeric keyboard, or
press the screen key corresponding to Turn Rollers off Immediately,
or, Run Until Stop key is Pressed.
5. If you entered the number of seconds, press the Enter key.
Timeouts:
Normal
Preset
Timeout
The normal preset timer option allows you to specify how much time you
want to allow the system to remain idle before it returns to the Normal
Preset settings (refer to 11 Define Preset section in this chapter for more
information on Normal Presets).
You can set this timeout for 0 - 1440 minutes, in 1 minute increments. The
default timeout is 30 minutes.
1. Press the
Menu key and select Set Up.
2. Select Basic Settings and then Timeouts.
3. Select Normal Preset Timer.
4. To set a timeout, enter the number of minutes (0-1440) using the nu-
meric keyboard.
5. If you want the system to stay at the last settings used, select Never
reset to Normal Preset.
6. Press the Enter key.
3. Select System Sleep.
4. Enter the number of minutes (0 - 1440 minutes) using the numeric key-
board.
5. Press the Enter key.