Pitney Bowes DM550 - Manual (Page 57)

SV61436 Rev. B 4-19
DM500™ and DM550™ Digital Mailing System Operating Guide
Selecting
the Meter
Stamp
Options
The Meter Stamp Options selection
allows you to change the elements
printed on your piece of mail or tape.
You access the Meter Stamp options
by pressing the Menu key on the
IntelliLink® Control Center and then
selecting Meter Stamp Options.
The list of options that display depends
on the model number of your mailing
system. All of the possible options,
shown in the menu on the right, are
described in this section.
6
Meter Stamp
Options:
Date
1. Press the Menu key.
2. Select Meter Stamp Options.
3. Select the Date option. Depending on your previous selections, a com-
bination of the following selections appears.
Don’t Print Date
Print only Month and Year
Advance Date (see NOTE)
4. Make your selection and follow the prompts on the main screen. Press
Enter when complete.
NOTE: If you select Advance Date and choose to store it in a preset,
refer to How to Store Advance Date in a Custom Preset in Chapter 5 in this
guide.
Meter Stamp Options
► Date
► Ad/Messages
► Inscription
► Piece ID Number*
► Print Position
► Multiple Tapes
* Internationa�� use on��y.