Pitney Bowes DM550 - Manual (Page 4)

iv SV61436 Rev. B
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
interference when the equipment is operated in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause interference to radio communications. Operation of this equip-
ment in a residential area is likely to cause interference, in which case the user will be required to
correct the interference at his own expense.
Use only a shielded interface cable to operate this equipment with a scale or other peripheral device.
CAUTION: Changes or modifications to this equipment not expressly approved by the party
responsible for compliance (Pitney Bowes) could void the user’s authority to operate the
equipment.
Alerting Messages
Various messages are used throughout this guide to alert you to potentially hazardous or error caus-
ing conditions. These messages are as follows:
WARNING! Alerts you to conditions or practices that could cause
serious injury.
CAUTION: Alerts you to conditions or practices that could cause
damage to the equipment or to the material being run.
IMPORTANT! Alerts you to conditions or practices that could adversely affect
equipment operation if instructions are not followed exactly.
NOTE: Provides a comment or explanation of the associated topic.