Tape is still on roll – Pitney Bowes DM550 User Manual
Page 139
SV61436 Rev. B
9-3
DM500™and DM550™ Digital Mailing System Operating Guide
Tape is still on roll
1. When you see the red stripe on the tape, go to the Tape Maintenance
screen:
a. Press the
Menu key.
b. Select
Maintenance.
c. Select
Load Tape.
d. Select
Unload Tape.
2. If you have a DM500™ or a DM550™ without the optional
WEIGH-ON-THE-WAY™ (WOW™) module, open the feed cover and
remove the tape roll.
If you have a DM550™ with the optional WOW™ module, open the
WOW cover and remove the tape roll.
Refer to the appropriate figure below.
Location of the tape roll
under the feed cover on
a DM500™ or DM550™
system without the optional
WOW™ module.
DM500™ or DM550™ Digital Mailing System
DM550™ Digital Mailing System with optional WOW™ module
Location of the tape roll under
the WOW™ cover on a DM550™
system with the optional WOW™
module.