Pitney Bowes DM550 - Manual (Page 145)

SV61436 Rev. B 9-9
DM500™and DM550™ Digital Mailing System Operating Guide
9. After cleaning the wick
and tank, place the
shield on the wick, mak-
ing sure that there is no
gap between the shield
and the surface of the
wick.
6. Drain the moistener tank over
the front of the machine into a
receptacle as shown here.
7. To clean the moistener tank, remove the E-Z Seal® Sealing Solution
supply tube and wipe out the tank with E-Z Seal® solution.
Clean the wick by holding it under running water.
8. Push the supply tube back onto the moistener tank nozzle. Push the
tube back on as far as it will go to prevent leaking.
Cleaning or
Replacing the
Wick
continued