Pitney Bowes DM550 - Manual (Page 53)

SV61436 Rev. B 4-15
DM500™ and DM550™ Digital Mailing System Operating Guide
Use this mode if you just want to seal the envelopes and do not want to
apply postage.
1. Press the
Mode key.
2. Select Seal Menu - No Printing and select the appropriate option.
3. Select the Reset Counter option if you want to clear the number of
pieces of mail fed into the machine in the seal only mode.
4. Place the mail on the feed deck.
5. Press the
Start key.
NOTE: For additional sealing options, press the Seal key on the IntelliLink
Control Center. This allows you to select the following options:
• Sealer on (seal envelopes)
• Sealer off
• Seal only, don’t print
Mode Selection:
Seal Only