4 • running mail – Pitney Bowes DM550 User Manual
Page 52
4-14
SV61436 Rev. B
4 • Running Mail
Mode Selection:
Manual Weight
Entry
To perform manual weight entry:
1. Press the
Mode key.
2. Select
Manual Weight Entry.
3. Type in the number of pounds and press
Enter.
If the weight of your mail is less than 1 lb, press the right arrow key to
go to the ounces field.
4. Type in the number of ounces and press
Enter.
5. Press the
Class key if required and select the class. For more informa-
tion, refer to
5
Se��ectin� a C��ass, Carrier or Specia�� Service in this
chapter.
NOTE: If the weight you enter is invalid for the class, you are prompted to
select another class.
6. If this is a package, press the
Tape key, otherwise go to step 7.
7. Place the piece of mail on the feed deck.
8. Press the
Start key.
Mode Selection:
Attached Scale
Use this option If the AutoScale feature is set to Off (see Set Up Sca��es/
Rates: AutoSca��e in Chapter 5 in this guide).
1. Press the
Mode key.
2. Select
Attached Scale. The “Attached Scale Mode” screen appears.
3. Place the piece of mail on the scale.
CAUTION: Make sure you center the mail on the scale and
check to be sure it is not touching any other surface or object.
4. If the class displayed in this screen is incorrect, press the
Class key
and select the class. For more information, refer to
5
Se��ectin� a
C��ass, Carrier or Specia�� Service in this chapter.
5. If this is a package, press the
Tape key, otherwise go to step 6.
6. Place the piece of mail on the feed deck.
7. Press the
Start key.