Pitney Bowes DM550 - Manual (Page 88)

5-20 SV61436 Rev. B
5 • Mailing System Setup
This option allows you to specify how long the system will continue to feed
mail placed on the feed deck without having to press the Start key.
You can set this timeout for 0 - 90 seconds, in 1 second increments. The
default timeout is 20 seconds.
1. Press the
Menu key and select Set Up.
2. Select Basic Settings and then Timeouts.
3. Select Waiting for Env.
4. Enter the number of seconds (0 - 90) using the numeric keyboard.
5. Press the
Enter key.
Timeouts:
Waiting for
Env
Timeouts:
Transaction
Timer
This option is available only if your mailing machine is connected to the
AccuTrac™ Mail Accounting system.
Use this option if you routinely batch your mail runs. This option allows you
to specify how much time to allow the system to remain idle before it ends
the current accounting transaction.
You can set this timeout for 10 - 65520, in 1 second increments. The de-
fault timeout is 14,400 seconds.
1. Press the
Menu key and select Set Up.
2. Select Basic Settings and then Timeouts.
3. Select Transaction Timer.
4. Enter the number of seconds (10 - 65520) using the numeric keyboard.
5. Press the
Enter key.