Pitney Bowes DM550 - Manual (Page 148)

9-12 SV61436 Rev. B
9 • Maintaining and Updating
15. Replace the moistener
brush assembly by pushing
it back on its track until it
snaps into position.
Check to make sure that the
flap blade of the moistener
brush assembly is under
(and not over) the stripper
finger as shown here.
16. Verify that the moistener brush assembly is perfectly level with the feed
deck.
17. Close the feed cover.
Stripper Finger
Feed Deck
Flap
Blade
Moistener Brush
Assembly