Paradyne 7112 User Manual

Page 82

Configuration Option Tables

A-6

7112-A2-GB20-10

March 1998

Table A-2.

Network Interface Options (4 of 4)

ANSI Performance Report Messages

Possible Settings: Disable, Enable
Default Setting: Disable

Specifies whether ANSI T1.403 compliant performance report messages (PRMs) are
generated.

Disable – Prevents the DSU/CSU from generating ANSI PRMs.

Enable – Generates and sends ANSI PRMs over the FDL every second.

NOTE:

This configuration option is only available if the framing format is set to
ESF.

Circuit Identifier

Possible Settings: ASCII Text, Clear
Default Setting: [blank]

Uniquely identifies the DS1 circuit.

ASCII Text – Enter a maximum of 15 characters.

Clear – Clears the field.