beautypg.com

Icmp (internet control management protocol) group, Tcp (transmission control protocol) group, Udp ( user datagram protocol ) group – Paradyne 7112 User Manual

Page 113

background image

MIB Descriptions

C-11

7112-A2-GB20-20

March 1998

Table C-5.

IP Group Objects (3 of 3)

Object, OID, Access

Setting/Contents

Description

ipRouteTable

(ip21)

(Continued)

Objects that are not used by this
unit:

H

ipRouteMetric2,
ipRouteMetric3,
ipRoutemetric4,
ipRoutemetric5 –
Default to –1.

H

ipRouteNextHop –
Defaults to 0.0.0.0.

Do not specify the following
read-only objects

in the Set PDU

used to add a route:

H

ipRouteProto – Set to
netmgmt(3) by the software.

H

ipRouteAge – Reflects the
value of the time-to-live for the
route (in seconds). Defaults to
999 (permanent route).

H

ipRouteInfo – Unused; set to
{0, 0}.

ICMP Group

The ICMP (Internet Control Management Protocol) Group objects are fully
supported.

TCP Group

The TCP Group objects are fully supported, with the exception of tcpConnState
object, which will be read-only, since deleteTCB (12) is not supported and is the
only value which can be set.

UDP Group

The UDP Group objects are fully supported.