Paradyne 7112 - Manual (Page 127)

MIB Descriptions
C-25 7112-A2-GB20-20 March 1998
Output Signal Table Objects
The Output Signal Table Objects contains entries for the output signals that can
be asserted by the unit, for the synchronous User Data port. Clarification for
objects contained in this table as it applies to the unit is provided below.
Table C-15. Output Signal Table Objects
Object, OID, Access Description Setting/Contents
rs232OutSigName
(rs232OutSigEntry 2 )
1.3.6.1.2.1.10.33.6.1.2
read-only
Contains the identification
of a hardware output signal. Supports only the following
values:
cts(2) – Clear To Sen
DS1r(3) – Data Set Ready
rs232OutSigState
(rs232OutSigEntry 3 )
1.3.6.1.2.1.10.33.6.1.3
read-only
Contains the current signal
state. Supports only the following
values:
on(2) – The signal is asserted.
off(3) – The signal is
deasserted.
rs232OutSigChanges
(rs232OutSigEntry 4 )
1.3.6.1.2.1.10.33.6.1.4
read-only
Indicates the number of
times that a signal has
changed from on to off, or
off to on. Increments the object each
time that the signal is sampled
(every 100 ms) and the signal
state is different from the
previous state.