Paradyne 7112 - Manual (Page 154)

Index
IN-2 7112-A2-GB20-20 March 1998
E
EER (Excessive Error Rate)
LED, 6-4
status message, 6-7
effective access level, 4-5
EIA-232 pin assignments, E-3
ending an ATI session, 2-7
enterprise
MIB objects, C-29
SNMP traps, D-4
environmental specifications, F-1
Ethernet cable, E-3
Ethernet port
connector, E-3
default gateway address, A-12
IP address, A-11
IP subnet mask, A-11
options, A-11
Use, A-11
Ethernet-Like MIB
objects not supported, C-20
objects supported, C-20
external device, access, 4-1
external modem interface, E-4
F
Facility Data Link (FDL), configuration option, A-4
Facility Data Link IP Addressing, configuration option,
A-4, A-5
factory default configuration options, resetting, 4-3
factory defaults, 3-2
FAIL, LED, 6-3
FDL
configuration option, A-4
subnet connection, 5-3, 5-4
FDLIP, configuration option, A-4, A-5
features, 1-1
framing, A-3
front panel, status indicators, 1-3
H
health and status messages, 6-7
I
identity, 3-1
installing rear connectors. See Start-Up Instructions
interface connections, 1-4
invert transmit clock, A-8
IP address, Ethernet port, A-11
IP addresses, 4-7, 5-1
IP interfaces, 4-1, 5-2
K
keyboard functions, 2-4
L
LADS connection distances. See Start-Up Instructions
lamp test, 7-12
LAN cable, E-3
LEDs, 1-3, 6-2
Line Build Out, A-4
line coding format, A-3
line framing format, A-3
link-layer protocols, 5-1
local line loopback (LLB), 7-4
login ID, 4-1
terminal port requirement, A-13
LOS (Loss Of Signal), status message, 6-7
M
main menu, 2-2, A-1
management port
access, 4-1
location, 1-4
Management Protocol Statistics, 6-15
Memory Fail, status, 6-8
messages
alarm and device, 8-1
health and status, 6-7
self-test results, 6-8
test status, 6-9
MIB
descriptions, C-1
Ethernet-Like MIB objects supported, C-20
general support, 1-4
monitor test pattern
data port, 7-12
network, 7-7
monitoring, 6-1