Paradyne 7112 - Manual (Page 120)

MIB Descriptions
C-18 7112-A2-GB20-10 March 1998
DS1 Near End Group Interval Table Objects
The DS1 Near End Group Interval Total Table contains the cumulative sum of the
various statistics for the 24-hour period preceding the current interval. The
following objects are provided for the network interface only. Objects in the DS1
Interval Table that are not listed below are not supported and will return an error
status if access is attempted.
Table C-9. DS1 Near End Group Interval Table Objects
Object, OID, Access Description Setting/Contents
dsx1IntervalIndex
(dsx1IntervalEntry 1)
1.3.6.1.2.1.1.10.18.8.1.1
read-only
The index that identifies the
network interface. Supports the following
values:
H 1 to 7FFFFFFF.
dsx1IntervalNumber
(dsx1IntervalEntry 2 )
1.3.6.1.2.1.1.10.18.8.1.2
read-only
Interval number. A number between 1 and
96, where 1 is the most
recently completed
15-minute interval and 96 is
the least recently completed
15-minute interval
(assuming that all
96 intervals are valid).
dsx1IntervalESs
(dsx1IntervalEntry 3 )
1.3.6.1.2.1.1.10.18.8.1.3
read-only
Errored Seconds for the
interval. An integer number.
dsx1IntervalSESs
(dsx1IntervalEntry 4 )
1.3.6.1.2.1.1.10.18.8.1.4
read-only
Severely Errored Seconds
for the interval.
dsx1IntervalUASs
(dsx1IntervalEntry 6 )
1.3.6.1.2.1.1.10.18.8.1.6
read-only
Unavailable Seconds for
the interval.
dsx1IntervalCCSs
(dsx1IntervalEntry 7)
1.3.6.1.2.1.1.10.18.8.1.6
read-only
Controlled Slip Seconds for
the interval.
dsx1IntervalBESs
(dsx1IntervalEntry10)
1.3.6.1.2.1.1.10.18.8.1.10
read-only
Bursty Errored Seconds for
the interval.