Paradyne 7112 - Manual (Page 100)

Worksheets
B-4 7112-A2-GB20-10 March 1998
Data Port
Configuration Option Settings (default in Bold)
Network Init. Data Channel Loopback Disable, V.54, FT1, Both
Port (DTE) Initiated Loopbacks Disable, DTLB, DCLB, Both
Ethernet Port
Configuration Option Settings Default in [Bold]
Port Use 802.3, Version 2, Disable
IP Address [000.000.000.000] – 255.255.255.255
IP Subnet Mask [000.000.000.000] – 255.255.255.255
Default Gateway Address [000.000.000.000] – 255.255.255.255
Terminal Port
Configuration Option Settings (default in Bold)
Data Rate (Kbps) 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, 38.4
Character Length 7, 8
Parity None, Even, Odd
Stop Bits 1, 2
Monitor DTR/RTS Enable, Disable
Login Required Enable, Disable
Port Access Level Level 1, Level 2, Level 3
Inactivity Timeout Enable, Disable
Disconnect Time (minutes) range 1 – 60, 5
Telnet Session
Configuration Option Settings (default in Bold)
Telnet Session Enable, Disable
Login Required Enable, Disable
Session Access Level Level 1, Level 2, Level 3
Inactivity Timeout Enable, Disable
Disconnect Time (minutes) range 1 – 60, 5